{"id":502,"date":"2026-10-09T13:11:33","date_gmt":"2026-10-09T05:11:33","guid":{"rendered":"http:\/\/www.fcsteeltech.com\/blog\/?p=502"},"modified":"2026-10-09T13:11:33","modified_gmt":"2026-10-09T05:11:33","slug":"what-is-the-beam-divergence-effect-on-a-flat-field-concave-holographic-grating-4075-5043f9","status":"publish","type":"post","link":"http:\/\/www.fcsteeltech.com\/blog\/2026\/10\/09\/what-is-the-beam-divergence-effect-on-a-flat-field-concave-holographic-grating-4075-5043f9\/","title":{"rendered":"What is the beam divergence effect on a flat – field concave holographic grating?"},"content":{"rendered":"

If you\u2019ve ever peered through a spectrometer and marveled at how it splits white light into a crisp, evenly spaced rainbow\u2014no distorted, stretched sections, no stray light bleeding across wavelengths\u2014you\u2019ve likely encountered a flat-field concave holographic grating (FFCHG). As a supplier who\u2019s spent the last decade designing, testing, and shipping these precision components to labs, aerospace firms, and semiconductor R&D teams across 27 countries, I know firsthand that the difference between a spectrometer that delivers publishable data and one that\u2019s just\u2026 okay often boils down to one often-overlooked variable: beam divergence. It\u2019s not a term that jumps off spec sheets, but ignore it, and you end up with blurry spectral lines, uneven sensitivity, and months of wasted R&D time. Let me break down how beam divergence interacts with FFCHGs, why it matters for your work, and how our team optimizes for it to deliver consistent, high-performance gratings every single time. Flat-Field Concave Holographic Grating<\/a><\/p>\n

<\/p>\n

First, let\u2019s ground this in the basics so we\u2019re all on the same page. A concave holographic grating isn\u2019t like the flat, ruled gratings you might have seen in basic physics demos. It\u2019s a curved optical element etched with microscopic, precise grooves that diffract light\u2014and crucially, it combines two functions: it disperses light into its component wavelengths and<\/em> focuses that light onto a flat detector plane, no additional focusing mirrors required. That\u2019s the \u201cflat-field\u201d part: instead of needing a curved detector (clunky, expensive, and hard to align), your spectrometer\u2019s CCD or CMOS sits on a straight line, making alignment simpler, more stable, and cheaper to produce. The \u201cholographic\u201d part means the grooves are etched using laser interference patterns, rather than mechanically ruled, so they\u2019re more uniform, have fewer defects, and cut down on stray light\u2014critical for low-light spectroscopy, astronomy, and semiconductor metrology.<\/p>\n

Now, beam divergence is the measure of how much a light beam spreads out as it travels. For example, a laser beam might have extremely low divergence (barely spreads over meters), while light from a broadband source like a deuterium lamp has high divergence\u2014it\u2019s a wide, diffuse beam coming out of the source\u2019s aperture. At its core, divergence is defined by the angle of the beam\u2019s edges relative to its central axis, and it\u2019s measured in milliradians (mrad). So why does this interact with FFCHGs, specifically? Because every groove on a grating acts like a tiny mirror, and how that mirror diffracts light depends on the angle of the light hitting it. If the beam is diverging, different parts of the beam hit each groove at slightly different angles\u2014and that throws off the whole delicate balance that makes a flat-field grating work.<\/p>\n

Let\u2019s get specific. The design of an FFCHG is calculated to produce a flat focal plane where each wavelength is focused to a single point, with minimal line width blur. When the incident beam has divergence, two key problems pop up: first, line broadening, and second, field curvature creep, even in a supposed flat-field design. Let\u2019s take line broadening first. Say you have a spectral line at 500 nm. If your beam is perfectly collimated (zero divergence), every photon hits the grating at the same angle, diffracts along the same path, and lands exactly on the 500 nm pixel on your detector. But add divergence\u2014even as little as 0.5 mrad, which is common for many broadband sources\u2014and the photons at the top edge of the beam hit the grating at an angle 0.5 mrad steeper than the central beam, while the bottom edge is 0.5 mrad shallower. Each of these will diffract at a slightly different angle, so instead of a sharp, 1-pixel-wide line, you get a line spread across 3-4 pixels. For high-resolution spectroscopy\u2014like measuring impurity levels in semiconductor wafers, or detecting faint spectral lines in astronomy\u2014that difference between a sharp line and a broad, blurry mess can mean the difference between a successful measurement and a useless dataset.<\/p>\n

The second problem is more insidious: divergence-induced field distortion, even on a flat-field grating. FFCHGs are engineered for a specific set of input conditions, usually a collimated beam with minimal divergence. When you introduce divergence, the focal plane that\u2019s supposed to be perfectly flat starts to curve at the edges. Let\u2019s say your spectrometer is designed for a 100 mm long flat detector, covering wavelengths from 200 nm to 800 nm. With a collimated beam, 800 nm lands on the far right edge of the detector, and 200 nm on the far left, all neatly along the straight line. But if your beam has 1 mrad of divergence, that far-right edge (the longest wavelength) will shift slightly closer to the center, and the short wavelengths on the left will spread wider. Now your \u201cflat field\u201d is actually a shallow curve, so some parts of your detector are perfectly focused, while others are slightly out of focus. That\u2019s a nightmare for calibration: you\u2019ll have to adjust wavelength offsets across your detector, and your sensitivity will drop at the edges, making it impossible to get consistent data across the full spectral range.<\/p>\n

But here\u2019s the thing I tell every customer who calls us confused about their FFCHG not performing as expected: beam divergence isn\u2019t inherently bad\u2014its impact depends on how the grating is designed for your specific beam. Too many suppliers treat FFCHGs as a one-size-fits-all component, but that\u2019s a mistake. At our facility, we don\u2019t produce off-the-shelf gratings and ship them to everyone; we design each FFCHG to the exact beam divergence of our customer\u2019s light source. Let me walk you through how that works, because it\u2019s the core of what sets our products apart.<\/p>\n

First, when a customer reaches out, we ask for three key details: their light source type (laser, deuterium lamp, xenon arc lamp, etc.), the source\u2019s output divergence, and the spectral range they need. A narrow-line laser with 0.1 mrad divergence needs a very different grating design than a broadband xenon lamp with 1.2 mrad divergence. For the low-divergence laser, we can design grooves that are optimized for minimal angular variation, so even tiny divergence doesn\u2019t cause line broadening. For the high-divergence broadband source, we adjust the groove spacing and curvature of the grating to compensate for that spread: we slightly tilt the focal plane correction so that even photons hitting the grating at edge angles converge back to the flat detector, no distortion.<\/p>\n

We also test every FFCHG we ship for divergence tolerance before it leaves our facility, a step most suppliers skip. Our test setup uses a variable divergence light source paired with a high-resolution spectrometer to measure line width and focal flatness at different divergence levels. If a grating is designed for 1 mrad divergence, we test it at 0.8, 1.0, and 1.2 mrad, and it has to meet our strict specs: line broadening of less than 5% at the full rated divergence, and less than 2% across the entire spectral range. Last year, we had a customer who\u2019d been using a competitor\u2019s off-the-shelf FFCHG for their semiconductor metrology; their line widths were consistently 2x wider than their required specification. They sent us their light source specs, and we found that the competitor\u2019s grating was designed for 0.5 mrad divergence, but their source had 1.1 mrad. We designed a custom grating optimized for their exact divergence, and their line widths dropped right to the required 0.05 nm\u2014something they hadn\u2019t been able to achieve in two years with other suppliers.<\/p>\n

There\u2019s also a common misconception that only high-divergence broadband sources matter, but beam divergence impacts even low-divergence applications. For example, in extreme ultraviolet (EUV) spectroscopy, where beam divergence can be as low as 0.01 mrad (the narrowest I\u2019ve ever worked with), even 0.005 mrad of divergence can cause line broadening for measurements at 13.5 nm, the wavelength used in next-gen semiconductor lithography. Our team designs gratings for these applications with extremely tight groove spacing tolerances\u2014we etch grooves with less than 0.1 nm variation across the grating surface, so even the tiniest angle variations from near-zero divergence don\u2019t cause blur. For EUV customers, this means their spectral line width is consistent, even when they\u2019re working with the most precise, focused beams available.<\/p>\n

Another point to consider is beam walk-off, which is closely related to divergence. If your beam is diverging, it\u2019s not just spreading along the dispersion axis (the axis that splits light into wavelengths)\u2014it can also walk off the grating\u2019s surface at the edges. That\u2019s a problem because if part of the beam is hitting an area of the grating that wasn\u2019t designed for that angle, the diffraction efficiency drops, and you get uneven sensitivity across your spectral range. At our facility, we design our gratings with a slightly larger active area than our customers request, so even with the maximum rated beam divergence, the entire beam hits the functional part of the grating, no walk-off. We also add anti-reflective coatings matched to the customer\u2019s spectral range, which further reduces losses from both divergence-related reflections and stray light.<\/p>\n

Let\u2019s talk about real-world use cases to put this in perspective. Last quarter, we shipped a batch of 12 FFCHGs to a team at a university observatory building a high-resolution spectrometer for studying exoplanet atmospheres. Their light source was a fiber-coupled calibration lamp with 0.8 mrad divergence, and they needed a spectral resolution of 0.02 nm across 400-900 nm. The observatory\u2019s initial design used a generic flat-field grating from a large supplier, and their test data showed line broadening of 0.1 nm at the red end of the spectrum, which would have made it impossible to detect the tiny spectral shifts caused by exoplanets. Our custom gratings, designed for exactly 0.8 mrad divergence, delivered line broadening of 0.018 nm across the entire range. The team\u2019s lead researcher emailed us a month later saying their spectrometer was now producing data that was accepted for publication in The Astrophysical Journal<\/em>, a result they almost missed because of a grating that didn\u2019t account for beam divergence.<\/p>\n

Now, I want to be clear: this isn\u2019t a problem that can be solved by just \u201cbuying a better grating\u201d or \u201ccollimating your beam to fix divergence.\u201d Collimating a high-divergence beam can be done with lenses, but every lens adds optical loss, introduces its own aberrations, and increases the size and cost of your spectrometer. For portable spectrometers, where size and weight are critical, you can\u2019t add a collimating lens\u2014so you have to design the FFCHG to handle your inherent beam divergence. That\u2019s where our approach differs: we optimize for your existing system, so you don\u2019t have to add extra optics that complicate alignment or reduce signal strength.<\/p>\n

If you\u2019re reading this and thinking, \u201cWait, my spectrometer has blurry lines, or uneven sensitivity, or my flat-field focus is curving at the edges\u201d\u2014beam divergence is almost certainly part of the problem. It\u2019s often not the first thing people check, because it\u2019s not listed as a primary spec on most grating datasheets. But it\u2019s one of the most impactful variables for FFCHG performance.<\/p>\n

At the end of the day, a flat-field concave holographic grating is only as good as how well it works with your specific beam. Off-the-shelf gratings are designed for average, generic beam conditions, but your system is unique\u2014your light source has a specific divergence, your spectral range is tailored to your work, and your detector is sized for your application. That\u2019s why designing for beam divergence isn\u2019t an afterthought for us; it\u2019s the first step in every FFCHG we create.<\/p>\n

<\/p>\n

If you\u2019re tired of wasting time adjusting your spectrometer to work with a grating that wasn\u2019t built for your system, or if you\u2019re getting data that\u2019s just not precise enough for your work, we can help. Our team will work with you to get the exact specs you need, test our gratings to match your beam\u2019s divergence, and deliver a component that integrates seamlessly with your setup, no compromises. We\u2019ve spent a decade refining this process, and we\u2019ve helped hundreds of customers across research, semiconductor, aerospace, and life sciences get the precise, consistent spectral data they need.<\/p>\n

Broadband Infrared Grating<\/a> References<\/p>\n

    \n
  1. Hutley, M. C. (1982). Diffraction Gratings. Academic Press.<\/li>\n
  2. Kaspar, B. (1990). Flat-field holographic gratings. Applied Optics, 29(10), 1487-1492.<\/li>\n
  3. Knop, K. (1978). Rigorous diffraction theory for holographic gratings. Journal of the Optical Society of America, 68(12), 1506-1513.<\/li>\n
  4. Loewen, E. G., & Popov, E. (1997). Diffraction Gratings and Applications. Marcel Dekker.<\/li>\n
  5. Yoshida, H., et al. (2015). Divergence tolerance of flat-field concave holographic gratings for high-resolution spectroscopy. Optical Engineering, 54(6), 061605.<\/li>\n<\/ol>\n
    \n

    Jilin Juyao Technology Co., Ltd.<\/a>
    As one of the leading flat-field concave holographic grating manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to wholesale customized flat-field concave holographic grating from our factory. Welcome to view our website for more information.
    Address: Room 101, No. 2 Huiwen Road, Nanguan District, Changchun City, Jilin Province, China
    E-mail: jyoptix@outlook.com
    WebSite:     https:\/\/www.jyoptix.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever peered through a spectrometer and marveled at how it splits white light into … What is the beam divergence effect on a flat – field concave holographic grating?<\/span>Read more<\/a><\/p>\n","protected":false},"author":119,"featured_media":502,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[465],"class_list":["post-502","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-flat-field-concave-holographic-grating-48e8-509154"],"_links":{"self":[{"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/posts\/502","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/users\/119"}],"replies":[{"embeddable":true,"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/comments?post=502"}],"version-history":[{"count":0,"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/posts\/502\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/posts\/502"}],"wp:attachment":[{"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/media?parent=502"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/categories?post=502"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.fcsteeltech.com\/blog\/wp-json\/wp\/v2\/tags?post=502"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}